BXMYJ - DX520 GALVAPREP SG
- MSDS: BXMYJ
- Manufacturer: PPG INDUSTRIES INC
- Product Name: DX520 GALVAPREP SG
- National Stock Number: 6850-00F041050
Product Identification
Product ID:DX520 GALVAPREP SG
MSDS Date:11/19/1987
FSC:6850
NIIN:00F041050
MSDS Number: BXMYJ
Responsible Party
PITTSBURGH, PA 15272-0001
US
Emergency Phone: 412-434-3131
Info Phone: 412-434-3131
Cage: 47695
Contractor
Telephone: 1-800-245-2974 (CAL HYPO)
Cage: 47695
Ingredients
ZINC DIHYDROGEN PHOSPHATE
Fraction By Weight: 10%
PHOSPHORIC ACID
CAS: 7664-38-2
RTECS: TB6300000
Fraction By Weight: 50-60%
OSHA PEL 1 MG/CUM
ACGIH TLV: 1 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 85 - 88%
FILM FORMERS RESINS, AND ADDITIVES (PROPRIETARY)
Fraction By Weight: 5%
HEAVY METALS
Fraction By Weight: <1%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL. EYES: SEVERE
IRRITATION. SKIN: CORROSIVE. THIS PRODUCT CONTAINS >1% OF MATERIAL
WHICH CAUSE BURNS. PROLONGED/REPEATED CONTACT MAY CAUSE ALLERGIC
REACTION. INHALATION: HARMFUL VAPOR S IRRITATES EYES, NOSE &
THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, ITCHING, CRACKING, BURNS,
SWELLING.
First Aid
First Aid:INGESTION: GIVE 1-2 GLASSES OF WATER. DON'T INDUCE VOMITING.
EYES: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR 30 MINS. SKIN: FLUSH
IMMEDIATELY W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP & WATER.
INHALA TION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Extinguishing Media:USE CLASS BE EXTINGUISHERS (CO2, DRY
CHEMCIAL,/UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
MAY BE USED TO COOL CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
PREFERRABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE/BURST (DUE
TO THE BUILDUP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESPIRATORY, SKIN & EYE PROTECTION PERMITTED.
REMOVE IGNITION SOURCES. TAKE UP MATERIAL W/SAWDUST,
VERMICULITE/OTHER ABSORBENT MATERIAL & PLACE INTO CONTAINERS FOR
DISPOSAL.
Handling
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED/PROTECTED BY NFPA CLASS II
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED (TC-23C-) PAINT SPRAY/AIR
SUPPLIED (TC-19C-) RESPIRATORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION.
Protective Gloves:NITRILE/NEOPRENE LATEX RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERMEABLE PROTECTIVE CLOTHING, SUFFICIENT
TO COVER ENTIRE BODY.
Work Hygienic Practices:REMOVE/LAUNDER/DISCARD CONTAMINATED
CLOTHING/SHOES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Density:>1
Spec Gravity:1.09
Solubility in Water:COMPLETE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES/MINERAL ACIDS/OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, TEMP >120F, FREEZING
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.